| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours After-Sales Service to Help Customer |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Model & Name | Quantity | Remarks |
| 1 | SJ50/25 single screw extruder | 1set | |
| 2 | Vacuum setting table | 1set | |
| 3 | DY600 haul off machine | 1set | |
| 4 | Servo flying cutter | 1set | |
| 5 | Profile mould | 1set | |
| 6 | ZJ200 feeder | 1set | |
| 7 | HD50 hopper dryer | 1set |
| Screw diameter | Φ50mm, screw length to diameter ratio: 25:1 |
| Motor power | 15kW, frequency conversion speed control |
| Screw heating zone | 3 zones |
| Heating power | about 11kW, heated by cast aluminum heater |
| Cooling method | screw forced air cooling, feed body water cooling |
| Cooling fan power | 180W, quantity: 3 |
| Screw speed | 40rpm |
| Material of barrel and screw | 38CrMoAlA, nitrided |
| Nitriding depth | 0.4-0.7mm, nitriding hardness: HV720-940 |
| Equipment center height | 1000mm |
| The main motor adopts a dedicated variable frequency motor. Inverter adopts JACT inverter The control part adopts Omron temperature controller, Chint low-voltage electrical appliances |
|
| Vacuum pump power | 3kW, water pump power: 3kW |
| 15 joints each for vacuum and water | |
| The water distributor frame is made of stainless steel | |
| The length of the water tank is 3000mm, equipped with aluminum profile guide rail | |
| Center height | 1000mm |
| Moving distance left and right | 80mm, moving distance up and down: 80mm |
| Moving distance back and forth | 500mm moving motor power: 0.55KW |
| Motor power: | 1.1kW, frequency conversion speed regulation |
| Traction speed | 0.5-6m/min |
| Track width | 100mm |
| Track length | 600mm |
| The main motor adopts a dedicated variable frequency motor Inverter JACT Inverter |
|
| Motor power | 2kW servo motor |
| Cutting method | flying knife cutting |
| The cutting length is adjusted according to the speed of the flying knife | |
| The whole machine is controlled by PLC and operated by touch screen | |
| Product width | less than 200mm |
| Product thickness | less than 3mm |
| Material | 45# steel , with chrome treatment |
| Motor power | 1.1kW |
| Feeding capacity | 100kg/h |
| Loading capacity | 50kg |
| Volume | 80L |
| Heating power | 3.5KW |
){kind=link}