| Customization: | Available |
|---|---|
| After-sales Service: | Good After-Sale Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Machine | Qty |
| 1 | Vacuum loader,Hopper dryer | 1 set |
| 2 | SJ75/30 Plastic extruder | 1 set |
| 3 | Hanger mold | 1 set |
| 4 | Vertical three-roll calender | 1 set |
| 5 | Mold temperature machine | 3 sets |
| 6 | Cooling bracket | 1 set |
| 7 | Trimming device | 1 set |
| 8 | Two roller tractors | 1 set |
| 9 | Winder | 1 set |
| 10 | Electric control | 1 set |
| Vacuum Feeder | |
| Working Mode | Vacuum suction |
| Motor Power | 1.1kw |
| Maximum Feeding Distance | 10meters |
| Material | Stainless Steel |
| Feeding Material Height | Can be customized |
| Conveying soft hose diameter | 80mm |
| 200KG Hopper Dryer | |
| Capacity | 100 kg |
| Heating Power | 7.5kw |
| Air fan Power | 0.32 kw |
| Weight | 80kg |
| Model | SJ75/30 |
| Central height | 1000±50 |
| Weight | 3000KG |
| Screw | |
| Screw Diameter | 75 |
| Screw efficient Length | 2250mm |
| L:D Ratio | 33:1 |
| Rotating Speed | 10-110 rpm |
| Screw Rotating direction | counterclockwise |
| Material | 38CrMOAl |
| Surface Treatment | Nitriding treatment and polishing |
| Barrel | |
| Material | 38CrMoAlA |
| Inner surface Treatment | Nitriding treatment |
| Heating control Zone | 8 sections |
| Heating Method | Cast aluminum heater |
| Heating power | 3KW×6 |
| Cooling System | Barrel Air fan cooling |
| Cooling power | 0.37kw×6 |
| Temperature Control range | 100ºC~300ºC |
| Main motor Power | |
| Main motor power | 45KW |
| Motor Type | AC Motor |
| Motor air fan power | 0.75 KW |
| Adjust speed Way | Frequency Inverter control |
| Gear Reduction Box | |
| Box Body Material | HT200 |
| Gear Material | 20CrMnTi |
| Gear surface Treatment | Gear surface quenching |
| Shaft Material | 40Cr |
| Gear box | Guomao |
| Electrical Component | |
| Working Electrical supply | 380V, 50HZ, 3Phrase |
| Frequency Inverter | ABB |
| Temperature Controller | Omron |
| Breaker | Siemens |
| Motor Brand | Siemens |
| PLC | Siemens |
| Effective width of die | 300mm |
| Thickness | 3mm |
| mould structure | Hangers type |
| Die lip adjustment | The upper die lip is adjusted by push - down mechanical device, and the lower die lip is fixed. |
| Three-roller form | Vertical (bottom up) |
| Roller diameter | 600 mm |
| length of the roller | 2500mm |
| Roller materials | High quality 45# seamless steel pipe production |
| Roller surface finish | Mirror treatment, Ra is less than 0.015um |
| Roller surface hardness | HRC58-62 |
| Chromium plating thickness | 0.08-0.12mm |
| rack | The frame adopts the reinforcement welding plate, the whole tempering.It is processed by large CNC to ensure the 3d precision of three rolls |
| Roller bearing seat | NSK high temperature bearing is adopted for the whole forging and roller bearing of 45# steel |
| Lubrication device | The bearing seat, bearing, rotating joint and other rotating parts must have lubricating oil nozzle |
| Three-roll machine | Four walking wheels can be adjusted vertically, range: 0-100mm The walking mechanism can move 2M before and after 4 walking wheels (which can be adjusted individually). |
| Before and after the motor power | 0.37kw |
| Roller drive | Three independent deceleration motors drive |
| Three roll reducer | The gearbox is used in the American FALK, the three rollers are stable and the precision is high, and the three rollers and traction can be adjusted separately and separately |
| Drive power | Up roller:3.0kw/Middle roller:3.0kw/Lower roller:3.0kw |
| Frequency conversion control | ABB inverter |
| Roller gap adjustment | Using worm gear and worm lifting pitch, with mechanical insurance, fine tuning and percentage meter device, stop switch, synchronous control system. |
| Roller structure | Single inlet single outlet |
| Working type | integral |
| Cooling medium | Water |
| Operating temperature | Stainless steel |
| Pump power(KW) | 1.5kw |
| Pump flow(L/min) | 80 |
| Pump head(m) | 30 |
| Heating power(kw) | 18 |
| Outline Dimenision(mm) | 966*370*694 |
| Weight | 110kg |
| structure | folding |
| length | 10meters |
| roller | Aluminum roller, surface anodic oxidation treatment, polishing, no death phenomenon |
| Trimming component (two aluminum rod support at the falling knife) | A set of two cutting knives, the position of the cutter can be adjusted, and the tool holder can be moved according to the thickness of the plate |
| Rubber roller size | Φ300x2500mm |
| Rubber roller number | 2 pcs |
| Rubber roller opening and closing | Using cylinder, pressure can be adjusted at both ends. |
| Motor power | 2.2kw |
| Moving roller distance | 60mm |
| Speed control | AC control system |
| Electrical control cabinet | Combined with three roller control cabinet |
| Maximum diameter of rolling | 800mm |
| Winding air shaft | 3" |
| Reducer | Worm gear reducer |
| Motor power | 5.5KW Weg brand |
| Control method | Frequency converter |
| Moving method | Guide wheel |
| Speed control type | ABB inverter |
| Control system | PLC control system |
| PLC brand | Siemens |
| Touch screen | Siemens |
| Temperature control module | Delta |
| Heating element | Relay |
| Contactor | Siemens |
| No. | Spare parts | Quantity |
| 1. | Extruder heater | 1pcs |
| 2. | Mold heater | 1pcs |
| 3. | high temperature wire | 10m |
| 4. | gas-type fitting | 5pcs |
| 5. | Contactor | 2pcs |
| 6. | Cutting blade | 2pcs |
| 7. | relay | 2pcs |
){kind=link}